Oh, you silvery dancing moonbeam beauty! Palest, whisper-soft grey that shines anywhere. Use where softness is needed, white is too bright and cream just won’t do.
Washable, breathable, chalk and mineral paint for interior walls and ceilings.
Voted best washable wall paint by the Good Housekeeping Institute
Voted Best Paint Range – Living Room at Ideal Home Awards 2025
An ultra-matte finish with excellent coverage
Self-priming - no primer required
Self-sealing - no top coat required
Easy-to-clean, scrubbable finish
Water-based, low VOCs and virtually no odour
Suitable for
Recommended for walls and ceilings. Also suitable for wooden furniture, interior wood work, wooden floors, kitchen cupboards, metal, powder-coated radiators, interior uPVC and ceramic wall tiles (we recommend avoiding very wet areas like showers/bath surrounds).
The Technical Stuff
Completely scrubbable once cured - ISO11998 Class 1 Wet Scrub rating
Safe for use on children's toys - EN71-3 certified
Contains: Chalk, Clay, Titanium Dioxide, Resin, Talcum, Preservative
Coverage
A 2.5l tin will cover up to 35m2 with a single coat. We recommend two coats for depth of colour and a more durable finish, so you can expect to cover approx. 17.5m2.
Coverage
A 2.5l tin will provide a coat of up to 35m². For a durable finish, 2 coats are required, so your 2.5l tin should provide full coverage for approximately 17.5m² on non-porous surfaces
Thinner application may affect durability
Porous surfaces will affect the rate of coverage and require additional coats
Always ensure you have enough paint for your whole project. When more than 1 tin of the same colour is needed, it is good practice to ensure batch numbers are identical or to intermix batches prior to commencing painting
Preparation
Ensure surfaces are in suitable condition for painting and clean, dry, free from wax, grease or penetrating substances and in sound condition. If previously painted, remove loose or flaking paint. Fill any holes/imperfections with a suitable filler
Remove any rust and apply a suitable metal primer - also apply primer to bare ferrous (iron based) metal
Recommended surface preparation in addition to the above – clean with Frenchic Sugar Soap, rinse, dry, hand-sand sufficiently to abrade the surface and/or to smooth any protrusions after filling. Wipe off any dust
You can watch our video on how to prep surfaces for painting here.
Ensure the surfaces are thoroughly dry prior to painting
For new plaster, industry standard advice is to apply an initial mist coat - in which case you can thin Frenchic wall paint with tap water up to a maximum of 10%
To promote a smooth finish, treat porous wood surfaces, like bare MDF, with an application of 2 coats of Frenchic Finishing Coat prior to painting
Take care on opening the tin lid – a Frenchic tin opener is recommended
Stir thoroughly with a wide implement, such as a Paint Paddle, prior to each use
Application, drying and curing (hardening)
Apply with a good quality brush or roller. Also suitable for spraying - thin with up to 15% tap water and apply additional coat(s)
Allow a minimum of 2 hours between coats (even if the paint feels touch dry)
Curing time is up to 2-3 weeks in normal conditions. Treat the newly painted surface with care until then
For floors, to avoid damaging the finish, do not walk on the area for 4 hours after painting and then with socks for the next 7 days. Also, try to keep pet paw claws off as well during this period. Do not allow the surface to become wet for at least a week. Continue to treat with care for up to 3 weeks
Painted floors may require maintenance
Clean up and storage
Reseal tin after use
Clean up any spills immediately with water
Wash brushes/rollers in warm, soapy water
Do not store where the tin could be subjected to damp, frost, freezing or high temperatures